Briechle Elektronik
Catalog
Deutsch English
Forgot password?
Register
My product comparison

DC-AC Power Inverter

12V to 230V AC (1) 24V to 230V AC (1)
Product image of the product “SW 600A-12 ”
SW 600A-12

Converter "MOBIL-NETZ"

▪ IN: 12V / OUT: 230V/50Hz
▪ Input: 2x open cable ends
▪ Output: open cable ends

  • Input voltage: 10 ... 15V DC
  • Output voltage: 225V +3% / -5%, 50Hz quarz-generated (115V/ 60Hz optional)
  • Output power: 600VA permanent, 1,200VA 10min, 12A (24A at 115V) 4sec
  • Connection input: 2x open cable ends
  • Connection output: open cable ends
  • Cable length input: 2x app. 1200mm
  • Cable length output: app. 2300mm
  • Current without load: standby current 5mA RMS at 12V
  • Switching level: start at 1W load
  • Current at 1W load:: 1A at 12V
  • Overvoltage: >16V, self resetting
  • Undervoltage: off at 10V, on at 11V
  • Efficiency: app. 95% at 100% load / app. 80% at 10% load / app. 80% at 200% load
  • Electrical protection: against reverse polarity, overtemperature, short circiut
  • Mechanical protection: aluminium casting case IP66
  • Dimensions: 260 x 160 x 90mm (without screwings) without cable outlet
  • Mass: app. 8,50 kg incl. Cables
  • Signalform: stepweave with fast PWM-modulation (to cos phi 0.2 at 50% load)
  • Safety: potential division with potential compensation (protective conductor)
  • Approval: CE
1 piece | /piece
Product image of the product “SW 600A-24 ”
SW 600A-24

Converter "MOBIL-NETZ"

▪ IN: 24V / OUT: 230V/50Hz
▪ Input: 2x open cable ends
▪ Output: open cable ends

  • Input voltage: 20 ... 30V DC
  • Output voltage: 225V +3% / -5%, 50Hz quarzgenerated (115V/ 60Hz optional)
  • Output power: 600VA permanent, 1,200VA 10min, 12A (24A at 115V) 4sec
  • Connection input: 2x open cable ends
  • Connection output: open cable ends
  • Cable length input: 2x app. 1200mm
  • Cable length output: app. 2300mm
  • Current without load: standby-current 5mA RMS at 12V
  • Switching level: start at 1W load
  • Current at 1W load:: 0.6A at 26V
  • Overvoltage: >33V, selfresetting
  • Undervoltage: off at 20V, on at 22V
  • Efficiency: app. 95% at 100% load / app. 80% at 10% load / app. 50% at 200% load
  • Electrical protection: against reverse polarity, overtemperature, short circuit
  • Mechanical protection: aluminium casting case
  • Dimensions: 260 x 160 x 90mm (without screwings) without cable outlet
  • Mass: app. 8,00 kg incl. cables
  • Signalform: stepweave with fast PWM-modulation (to cos phi 0.2 at 50% load)
  • Safety: potential division with potential compensation (protective conductor)
  • Approval: CE
1 piece | /piece