Description
24 Volt resistor replacement load for the adaptation of light emitting diode (LED) trailer lamps at vehicles with incandescent lamp monitoring. The failure of a LED unit is indicated and the replacement load is turned off. To cool the system a metal surface is needed. The Bypass-function enables subsequent mounting of bulbs up to 180W.
Features/Details
- simply connect ahead of LED lamps
- LED-failure is indicated
- the input will be connected to the output in a bulb connection
- serves all lines with replacment resistors
- short circuit proof
- input cable 3,5m can be connected directly to the plug
Product data
Specification
Product number: 11224
- Operation voltage
- 24V nominal
- Output current
- max. 8A each line (bypass on)
- Connection input
- sheathed cable 7x1+1x2,5mm², open cable ends
- Connection output
- sheathed cable 7x1+1x2,5mm², open cable ends
- Load imitation
- 2x17 W (direction), 2x4W (rear lamp), 1x34W (stop light) 1x17W (fog lamp), 1x17W (reversing lamp)
- Cable length input
- app. 3500mm
- Cable length output
- app. 1200mm
- Temperature range
- -40 ... +75°C
- Electrical protection
- overcurrent, overtemperature, reverse polarity
- Mechanical protection
- IP 6K9K (entirely sealed)
- Dimensions
- 280 x 70 x 25mm
- Mass
- app. 1,62 kg
- Failure monitor LEDs
- 24mA (direction), 860mA bypass, 6,5mA (rear lamps), 330mA bypass, 9mA (stop light), 1510mA bypass, 9,5mA (rear fog lamp), 860mA bypass, 24mA (refersing light), 860mA bypass
- Mounting rule
- cooling plate 8dm² (aluminium sheet 1.5mm thikness) or on chassis frame
- Approval
- E1 10R-046841